Current Employment Opportunities >> Inspector - 2nd Shift
Inspector - 2nd Shift
Title:Inspector - 2nd Shift
Country:United States
Department:Manufacturing Operations
To inspect and document as required, first article, receiving, in-process, and finished production/prototype assemblies and sub-assemblies for conformance to the quality assurance standards. This individual has the responsibility and authority to carryout assigned tasks.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned as necessary.
  • Able to apply knowledge of machine shop practice/procedures
  • Understand the basic concepts to lay out hardware to exacting tolerances and be capable of performing 100% dimensional inspection and measure dimensions such as angles, arcs, and radii of complex components and sub-assemblies.
  • Verify inspection equipment, machinery, and tools used are calibrated per company procedures.
  • Capable of locating datums and other gaging points on castings, forgings and all components.
  • Capable of marking guide lines and reference points used to indicate material which will be removed manually, by machining, or etching processes.
  • Accurately complete all quality documentation, such as inspection record sheets, quality plans and receiving inspection documents.
  • Initiate NMR documentation when parts are nonconforming per the Quality system.
  • Must have full working knowledge in the use of inspection tools and gages, such as scribes, vernier calipers, height gages, depth gages, micrometers, cylindrical plugs and thread gages, periphery or PI tapes, decimal scales, indicators, inspection fixtures, optical comparator, coordinate measuring machine and other manual/automated measuring devices.
  • Perform in-process and machine inspection on such equipment as vertical boring mills, radial drills, laser machines, water jet and lathes.
  • Perform bench dimensional inspection of machined rings, spinning, forgings, castings, sub-assemblies and assemblies.
  • Perform visual and dimensional inspection of welds prior to fluorescent penetrant testing,
  • Setup and try out inspection equipment to ensure accuracy.
  • Perform hardness checks of workpiece surfaces.
  • The ability to be responsible for assigned tasks and the authority to perform them.
The job has no supervisory responsibilities. However, the employee under the supervision of the Department Supervisor, Quality Systems’ Manager, and/Quality Engineer, will assist in the training of other employees.
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Employee must have a High School Diploma or equivalent and a minimum of 2 – 4 years of documented, related experience in quality inspection in a manufacturing environment. Basic computer skills are required. Knowledgeable in the use of “V” blocks, jo-blocks, knees, planer and thread gages.
Must possess the ability read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, engineering blueprints, and be able to understand and apply GD&T concepts. Obtain product information such as specified material, surface finish, and dimensions from blueprints and engineering specs. Posses the ability to follow verbal and/or written instructions from work instructions, process specifications, and direction of supervisor in completing a variety of inspection tasks. Ability to write routine reports and correspondence. Ability to speak effectively before employees in the organization.
Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Have the ability to use shop geometry and trigonometry.
Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram forms. Ability to deal with problems involving several concrete variables in standardized situations.
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to pass an annual eye exam, resulting in 20/20 corrected vision.
While performing the duties of this job, the employee is regularly required to use hands to finger, handle or feel. Must be able to communicate verbally and have the ability to hear. The employee frequently is required to stand, walk, reach with hands and arms and stoop or crouch. The employee is occasionally required to sit. The employee must regularly lift and/or move up to thirty (30) pounds and occasionally lift and/or move up to fifty (50) pounds. Specific vision abilities required by this job include close vision.
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, electrical equipment, acetone, alcohol, argon, braze alloys, nitrogen, hydrogen, oil based lubricants and cleaning solutions. The employee is occasionally exposed to moderate cold and extreme heat. The noise level in the work environment is usually middling.
This opening is closed and is no longer accepting applications
Powered by ApplicantStack